SystemAir RVF, Инструкция по установке, эксплуатации и обслуживанию

Страница: 3 / 28

1 Introduction
1.1 Product description
The product is a centrifugal fan with an AC or EC motor.
The product is not supplied with a safety switch, external
speed control or FK fast clamps, these parts are available
and recommended as accessories.
1.2 Intended use
The product is used for extraction of clean or contaminated
air with a maximum temperature of between 60-70 °C for dif-
ferent products.
The product is intended for installation on outer walls, con-
nected to circular duct systems. The product is intended for
installation in outdoor environments with ambient tempera-
tures of between -25 °C and +70 °C.
The product is not applicable for transportation of air that
contains explosive, flammable or aggressive media. The
product is not applicable for locations where there is a risk of
explosion.
1.3 Document description
This document contains instructions for installation, operation
and maintenance of the product. The procedures must be
done by approved personnel only.
Speak to Systemair for more information on how to install the
product in different installation locations.
1.4 Product overview
5
6
2
4
3
1
1. Motor and fan impeller
2. Connection box
3. Name plate with airflow direction arrow
4. Air outlet
5. Casing
6. Air inlet and duct connection
1.5 Name plate
1
3 2
12
14
13
7
8
9 10 11
4 5 6
1