deltawaveC
deltawaveC
deltawaveC
deltawaveC-
-
-
-F
F
F
F 2CH
2CH
2CH
2CH
Quickstart
Quickstart
Quickstart
Quickstart
V1.01
A
User Interface
User Interface
User Interface
User Interface
deltawaveC-F will be switched on automatically after supply voltage has been plugged on.
Activates / deactivates the background lighting
To navigate through the different menus please use the keys located on the left and right beside the
display.
Move cursor in specific direction
Confirm your settings
Back to previous menu
XYZ
Activates a certain function (depending on choosen menu)
B
Set
Set
Set
Set-
-
-
-up your flow measu
up your flow measu
up your flow measu
up your flow measurrrrement in 5 steps
ement in 5 steps
ement in 5 steps
ement in 5 steps
1. Choose suited mounting position for your transducers
2. Parameterize your flow transmitter
3. Mounting of ultrasonic transducers on your pipe
4. Set zero point (if possible)
5. Start your flow measurement
Pipe need to be filled completely for clamp-on measurement
C
Parameterization and mounting
Parameterization and mounting
Parameterization and mounting
Parameterization and mounting
1. Switch on flow transmitter (automatically when plugging on supply voltage, see below)
2. Choose menu „quick setup“
3. Select measurment channel 1 or 2
4. Select diameter or circumference (depending on what figure you have) of your pipe
5. Put in value for diameter or circumference
6. Put in value for wall thickness of your pipe
7. Select pipe material
8. Select lining (if there is a lining)
9. Select type of ultrasonic transducer
Nr. 1 = XUC-FW-F21 DN10…..DN100
Nr. 2 = XUC-FW-F20 DN10…..DN100 (replaced by ultrasonic transducer model XUC-FW-F20 )
Nr. 3 = XUC-FW-F10 DN32…..DN400
Nr. 4 = XUC-FW-F05 DN200…DN6000
10. Select method of mounting. Standard is V-mounting.
Confirm your settings and moves to next menu
Increase of values
Decrease of values
No function
