User Manual of SY6000-Z series Operation
4.2 Testing stage of the cabinet
Under circumstance of same mould and raw material, measure
electricity consumptions of moulding injection machine at two running
states of power frequency and energy saving during the same time, and
calculate energy saving rate.
When switch power frequency and energy saving, technician should
adjust timely parameters of moulding injection machine and the cabinet
until it produces qualified products.
For some types injection molding machines, don’t need change
parameters of moulding injection machine after adjustment of the cabinet,
as switchover between power frequency and energy saving doesn’t effect
product quality.
4.3 Normal using stage
After installation and adjustment of the cabinet, please run the cabinet
at the state of energy saving in normal use.
When users need replace moulds, technician only need adjust the
parameters of flow and pressure until it produces qualified products.
Precautions:
★
1. Shunting changeover switch is forbidden during running. Otherwise
it will cause malfunction to the cabinet.
2. Do not convert running of power frequency/ energy saving, so as to
avoid protection action of the cabinet.
Warning:
★
Do not connect AC power supply to output terminals (U, V, W),
otherwise will lead to damage the cabinet, and even cause fires!
9
