SYNTHR SYNTHR3, Руководство пользователя

Страница: 19 / 38

Page 19
SYNTHR3 Manuel V1.01 EN
MONOPHONIC MODE
Channel:8 locked
Mastertune=A440
MidiRST Edit.
ARPEGGIATOR >0
OCT SWG DIR LFO VCO2
+2 50% <-> x2 cv1
Next ↕Arpeggio Esc
MIDI CONTROLLER FUNCTIONS
A control screen of 4 lines by 20 characters allows to use the SYNTHR3 by three commands located below the screen: The
first three lines always concern the current action and / or mode, the fourth line specifies the momentary role of the
commands located below.
These commands are :

a rotary encoder allowing to modify a numerical value and to validate it by a direct press on "OK".

A button in the left zone. This button will be called " Button A "

A button on the right-hand side. This button will be called "Button B".
Buttons A and B have variable functions depending on the situation, and these functions are recalled on the screen in the
lower right or left area, and throughout this manual.
Screen samples :
In the 1st screen, button A allows you to search for the MIDI channel in the 2nd screen it is used to move the cursor " > "
which allows you to modify the following parameter via the encoder.
In the 1st screen, button B is used to go to the next screen to choose another function, in the 2nd screen, it is used to exit the
current menu.
Under this controller we find the connections to the outside and not far from the Master Tune setting.
The MIDI In and Thru are self-explanatory, as for the "Polychain",
we will specify its role later on.
POWER UP
The first time the SYNTHR3 is turned on, once it has passed the home screen, it is positioned in the MONOPHONY game
mode. Afterwards, any changes applied by the user will be saved for the next power-up.
Screen organization
Once past the home screen, the screens are organized as follows:
From the screen of a game mode (main screen), you can go down to the functions using "Edit. "(Button B) and return with
Escape. Changing functions on the function bar is done with the encoder and OK for the selection.
The function selection area is called: "Function bar"».