Synthes Universal Battery Charger II, Инструкция по эксплуатации, Страница: 12 / 40

11 DePuy Synthes Instructions for Use Universal Battery Charger II
Fig. 2
Fig. 3
Charging the battery
Place the battery to be charged in the proper direction
into the corresponding slot of an empty charger bay.
Ensure­that­the­battery­is­fitted­correctly­and­is­identified­
by the device (symbol
­is­yellow).­See­fig.­2.­
Only one battery can be charged in each charger bay at
a time. All charger bays can, however, be used simulta-
neously with any combination of battery types.
Warnings:
•
Insert the battery into the correct slot.
•
Do not charge damaged batteries with UBC II.
Inspect battery for cracks and damage.
•
Do not insert any objects other than authorized
Synthes batteries into the charger, as the contacts
may otherwise be damaged.
Precaution:
•
If the symbol does not light up after the battery is
inserted, remove the battery and insert again or
insert into another charger bay.
•
Only use fully charged batteries to avoid delays
during surgery.
Depending on the charge status and type of battery, it
can take from about 15 minutes to around 60 minutes
to charge.
Once the battery is fully charged, the symbol is green
and the charger switches to maintenance charge
(fig.­3).­The­battery­can­be­left­in­the­charger.­Leave­the­
device switched on to ensure that the battery is always
fully charged.
If the battery is removed from the charger before the
symbol
lights up green, it will not be fully charged.
Operating the Device
Charging the Battery