Synthes Universal Battery Charger II, Инструкция по эксплуатации, Страница: 10 / 40

8 DePuy Synthes Instructions for Use Universal Battery Charger II
Before­starting­for­the­first­time,­ensure­that­the­power­
switch is set to
 . The device can only be connected to
the power supply using the supplied power cord. Set the
power switch to
I ­to­turn­the­device­on­(fig.­1).­The­ON/
OFF blue LED on the front of the device shows that it is
working­­properly­(fig.­2).­If­the­blue­LED­flashes,­the­
device must be sent in for control.
If the symbol ­for­a­single­charger­bay­is­red­(fig.­3)­
before the battery is inserted, this charger bay is
faulty. In this case, batteries/power modules can still
be charged in the other charger bays, but it is recom-
mended that the device be sent to the local DePuy
Synthes representative for repairs.
Warning: Ensure that the ventilation holes in the
base and side of the device are not covered by tow-
els or other objects.
Precaution: Ensure that the power cord can always
be disconnected immediately from mains supply.
Operating the Device
Starting the System
Fig. 1
Fig. 2
Fig. 3