Synthes Anspach Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 46

Synthes Anspach Скачать руководство пользователя страница 35

Compact SpeedReducer

Compact SpeedReducer

CSR60 Perforator Driver with Hudson End

This Perforator Driver attachment allows Hudson style cranial
perforators to be used with the eMax 2 and eMax 2 Plus
(60:1 Ratio, approximately 1,300 rpm.)

Refer to the Cranial Perforator manufacturer’s operating in-
structions for rotational speed requirements.

Note:

Instructions are written such that distal end of hand-

piece and attachment are pointed away from user.

1. Remove red storage cover.
2. Move handpiece knurled knob to “RUN” (

) position.

3. Slide SpeedReducer over distal end of handpiece. Pull

SpeedReducer towards handpiece and rotate to right ap-
proximately one-quarter turn until fully seated. Handpiece
knurled knob will move up to seat next to SpeedReducer.

4. Pull SpeedReducer retaining sleeve towards handpiece.

Insert Hudson-end of cranial perforator and release retain-
ing sleeve.

Disassembly

1. Pull SpeedReducer retaining sleeve towards handpiece

and remove cranial perforator from distal end of
SpeedReducer.

2. Move handpiece knurled knob to “SAFE” position.
3. Rotate SpeedReducer to left approximately one-quarter

turn and remove from distal end of handpiece.

4. Replace red storage cover.

Note:

– The red storage cap provided with the Compact

SpeedReducer is to prevent damage to the shaft.

– The cap is removed for cleaning and washing but replaced

for sterilization.

– The device may be sterilized without the red storage cap.

34

Synthes

Anspach Electric Systems

Instructions for Use

0x6.001.507_AD 13.06.14 11:12 Seite 34

«
...
33
34
35
36
37
...
»

Содержание Anspach















































Отзывы:

Нет отзывов