Synthes Anspach Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 46

Synthes Anspach Скачать руководство пользователя страница 32

S-SAW

R-SAW

O-SAW

Oscillating, Sagittal, and Reciprocating Saw
Attachment Assembly

S-SAW Sagittal microSaw Attachment
R-SAW Reciprocating microSaw Attachment
O-SAW Oscillating microSaw Attachment

1. Insert attachment drive shaft into distal end of keyless

driver or distal end of e12 handpiece. Rotate until three
tabs on attachment engage three slots in keyless driver
or e12 handpiece.

2. Continue to rotate counterclockwise while pushing

attach ment into keyless driver or e12 handpiece until
attach ment locks into position and release ring snaps into
position. When fully engaged, contours on keyless driver
body or e12 handpiece, release ring, and saw attachment
will be in alignment.

Oscillating Saw Blade Assembly

1. Press down on release button to open saw blade mount-

ing plates.

2. Insert saw blade into opening and align saw blade hub

with locking pins in mounting plates. Oscillating saw
blades can be aligned in 45° increments.

3. Release button and ensure mounting plates are firmly

seated on saw blade without gaps.

Sagittal Saw Blade Assembly

1. Press down on release button to open saw blade mount-

ing plate.

2. Insert saw blade into opening through slot on mounting

plate and align saw blade hub with locking pins in mounting
plate.

3. Release button and ensure mounting plate is firmly seated

on saw blade without gaps.

Reciprocating Saw Blade Assembly

1. Rotate chuck counterclockwise until chuck has opened

sufficiently to accept a saw blade.

2. If blade has a shank with a shaft, insert shaft of blade in

chuck jaws until it is fully inserted and tighten chuck knob
clockwise until snug.

3. If blade has a flat shank, insert blade into slots in chuck

until it is fully inserted and tighten chuck knob clockwise
until snug.

Saw Blade Removal

1. Saw blade removal is reverse of installation.

Anspach Electric Systems

Instructions for Use

Synthes

31

0x6.001.507_AD 13.06.14 11:12 Seite 31

«
...
30
31
32
33
34
...
»

Содержание Anspach















































Отзывы:

Нет отзывов