Synthes Anspach Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 46

Synthes Anspach Скачать руководство пользователя страница 16

E-FP-DIR Foot Control

Directional
Control
Switch

E-FP Foot Control

Irrigation
Control
Switch

Directional
Control
Switch

EMAX2-FP or EMAX2PLUS-FP Foot Control

Foot Control Operation

Certain optional foot controls have direction and irrigation
control switches.

1. See Step 2 of Console Face Panel Operation to set opera-

tional direction of handpiece.

2. Optional: Depress “Foot” button on face panel to activate

Foot Control 1, depress again to activate Foot Control 2.
Only one foot control may be active at a time.

Note:

Handpiece is fully functional at this time.

3. Press on foot control pedal to start handpiece. Increase

pressure on pedal to increase speed of handpiece and re-
lease pressure on pedal to decrease speed of handpiece.

4. Optional: To change direction of handpiece, depress Direc-

tional Control Switch located on top left of foot control
for a minimum of one second. When direction changes, a
single beep will sound and LED on console face panel in-
dicates direction of rotation. Direction can only be
changed when handpiece is not running.

5. Optional: To activate irrigation, depress Irrigation Control

Switch on top right of foot control for a minimum of one
second and then step on center of foot control pedal.
Upon activation, LED on face panel illuminates; irrigation
pump and handpiece start.

Anspach Electric Systems

Instructions for Use

Synthes

15

0x6.001.507_AD 13.06.14 11:12 Seite 15

«
...
14
15
16
17
18
...
»

Содержание Anspach















































Отзывы:

Нет отзывов