Syntec 610-E5, Руководство по эксплуатации, Страница: 37 / 129

机床产品
/Machine Tool Products
–
610-E5/610-H5 5-Axis Wood Operation Manual
Function Key and System Configuration
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
1.6.4 MDI Input
Path
5 key, 8 key: F4 Monitor → F3 MDI Input
10+8 key: G4 Monitor → F3 MDI Input
Explanation
Edit the MDI executing program
Operation Method
Switch to MDI mode.
An editing block will appear after selected "MDI Input"
Edit the program and press OK to save the content in MDIBLOCK.
Press Cycle Start to execute the MDI program.
Note
This function is only enabled in MDI mode.
1.6.5 Parameter Set
Path
5 key, 8 key: F4 Monitor
→
F4 Param. Set
10+8 key: G4 Monitor
→
F4 Param. Set
Explanation
Switch the screen between "Machining Parameter" and "Machining Information"
1.6.6 Tool Wear Set
Path
5 key, 8 key: F4 Monitor → F5 Tool Wear Set
10+8 key: G4 Monitor → F5 Tool Wear Set
Description
Set the tool wear value
Actual Tool length= Tool Tool wear
Parameters
Tool Wear Set: Subtle tool length modification.
Note
The tool wear set value will be cleared after the corresponding tool length is set.
1.6.7 Work Record
Command:
5 Buttons type: F4 monitor-> Next->F2 work record
8 Buttons type: F4 monitor-> F7 work record
Description
Check current machining record and export to external storage device.
1.6.8 Clear Acum Cycle Time
Command:
5 Buttons type: F4 monitor-> Next->F3 Clear Acum Cycle time
8 Buttons type: F4 monitor ->F8 Clear Acum Cycle time
Function
Clear the accumulative time