Syntec 610-E5, Руководство по эксплуатации, Страница: 36 / 129

机床产品
/Machine Tool Products
–
610-E5/610-H5 5-Axis Wood Operation Manual
Function Key and System Configuration
–
•
a.
•
b.
•
c.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Explanation of Display:
Interrupt Line No.
Display the last interrupted serial number (N)
Interrupt Colum No.
Display the last interrupted line number (L)
Spindle speed
Speed of spindle.
It is allow to setting when system is busy. Moreover, it will be enabled immediately
Feed rate
Set the speed of the feed rate.
。
It is allow to setting when system is busy, but the value will be updated after completely executing
processing block.
Total AcumPar
Total work pieces number machined by CNCSystem cannot automatically reset this value to zero
Part count
Setting current work pieces no.
Count no. will begin from zero when the running program is change.
When CNC executes M code defined by parameter 3804, part count would be added 1 and run time
will be reset to 0. When required part number is reached, system will change to halt status.
Required part
Set the upper limit of part count number.
Once part count number is reached, an alarm will be pop up and system will change to halt status.
Simulation Area
Description
Display the tool trajectory of current program.
Related setting, please see F2-program-> F5-simulaiton-> F5- Simu. Setting.
Use F2
「
Simulation Switch
」
to change the display content
1.6.2 Open File to Edit
Path
5 key, 8 key: F4 Monitor → F1 Edit
10+8 key: G4 Monitor → F1 Edit
Explanation
Load current machining file into the program editor and switch the screen to "Program".
Note
The screen will be switched to "Program" if this button is pressed during machining, but it's unable to
edit the current executing file.
1.6.3 Simulation Switch
Path
5 key, 8 key: F4 Monitor → F2 Simulation Switch
10+8 key: G4 Monitor → F2 Simulation Switch
Explanation
Show/Hide the simulation area.
The button "Graph Adjust" will only be enabled when simulation area is displayed on the screen.