Syntec 610-E5, Руководство по эксплуатации, Страница: 14 / 129

机床产品
/Machine Tool Products
–
610-E5/610-H5 5-Axis Wood Operation Manual
Function Key and System Configuration
–
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
If
「
Block Copy
」
is used, the block that had been selected will not disappear.
Note
If
「
Block Cut
」
is use, and do not paste the content immediately, the cut program will disappear.
The contents of
「
Block Cut
」
can be pasted for only one time but the contents of
「
Block Copy
」
can be pasted for many times.
1.4.6 Teach
Command
5 Buttons type: F2 Program → Next → F3 Teach
8 Buttons type: F2 Program → F6 Teach
Function
Move the machine table with
『
MPG
』
/
『
JOG
』
/
『
INJOG
』
to the destination and use
『
Teach
』
function, input the current absolute coordinate value to NC program.
Omit the manual input problem.
Rapid Teach
Command
5 Buttons type: F2 Program
→
Next
→
F3 Teach
→
F1 Rapid Teach
8 Buttons type: F2 Program
→
F6 Teach
→
F1 Rapid Teach
Function
Add the current absolute coordinate as the value of
「
G00 Rapid Traverse
」
function in current
program.
Line Cut Teach
Command