Section III
Operation
006-0006205
UPS-1500 Series
Rev ZC
31 of 60
05/28/2019
Operating Environment
The SynQor UPS-1500 Series is designed for the extreme environmental conditions of military
and aerospace applications. All the electronic circuitry and the battery pack are contained in
a sealed, weather-proof, shock-proof chamber constructed of die-cast aluminum. Only the
redundant, water-proof cooling fans are exposed to the environment. Protection circuitry
ensures that the battery is not charged or discharged if it is too hot or too cold. The UPS will
shut down if it is too hot.
The UPS (with cables connected or connector covers installed and the battery pack installed) has
been qualified to the following requirements of MIL-STD-810G:
MIL-STD-810G
Test Method
Name
Procedure
Details
500.5
Low Pressure
I, II and III
▪ 15,000 ft. operating
▪ 40,000 ft. storage
501.5
High Temperature
I and II
▪ +55
o
C operating
▪ +65
o
C storage
502.5
Low Temperature
I and II
▪ -20
o
C operating
▪ -40
o
C storage
503.5
Temperature Shock
I
▪ 10 cycles; >10
o
C/minute
506.5
Rain
I
▪ 4” rain/hour
▪ 40 mph wind velocity
507.5
Humidity
NA
▪ >95%
508.6
Fungus
NA
▪ 28 day test
509.5
Salt Fog
NA
▪ 5% salt solution
▪ 2 cycles (24 hr wet/24 hr dry)
510.5
Sand and Dust
I and II
▪ 20 mph blowing dust
▪ 40 mph blowing sand
514.6
Vibration
Category 5
▪ 5Hz (300 RPM)
▪ Loose Cargo
514.6
Vibration
Category 7
▪ General Exposure
514.6
Vibration
Category 8
▪ C-130 Aircraft level
514.6
Vibration
Category 9
▪ General Exposure
514.6
Vibration
Category 24
▪ PSD = 0.04 g
2
/Hz; 20-2000 Hz
▪ Operating
516.6
Shock
I, IV and VI
▪ 20 g/20 ms; 40 g/11 ms; 75 g/6 ms
▪ 48 inch drop in transit case
▪ 30 degree tilt and drop
528
Mechanical Vibrations of
Shipboard Equipment
I
▪ Operating
