Synology NAS RS2421+, Руководство по установке оборудования, Страница: 18 / 32

18 Chapter 2: Hardware Setup
Install and Remove Rail Kits
Here we use RKS1317 as an example to illustrate how to install or remove the rail kits. For more information
about the rail kit installation, please refer to the Quick Installation Guide that comes with the rail kit.
To install the rail kit
1 Install the rail kit to the rack:
a Attach the rear end of the rail kit assembly to the rack.
b Slide the front latch outward and insert the brackets into the rack holes.
2 Extend the inner rail from the assembly and pull it out.
3 Align the fixing holes of the inner rail to the attachment points on the side of the chassis. Slide the inner rail
away from the front panel to attach it to the chassis.