Synergy Global Technology LCD1U17-35, Руководство пользователя

Страница: 31 / 31

24
1. Power up the console, and then turn on your computer.
2. Make sure the video image is centered within the screen area. Use the OSD
controls to adjust the image (see note below) or press the Auto button on the left
or underneath of the panel.
If the unit does not power on when the panel is pulled up, try to push
the power on/off button underneath or on the left of the LCD panel to
power up the unit.
You can adjust the horizontal and vertical position, contrast, and
brightness to better suit your video card and your personal preference.
Refer to Chapter 2 for more information on using the on-screen menu
to adjust the video display.
Before you begin, make sure that powers to all the devices you will
be connecting up have been turned off. To prevent damage to your
installation due to ground potential difference, make sure that all
the devices on the installation are properly grounded. Consult your
direct vendor for any technical issues if necessary.
4. KVM Switch
For the KVM switch user manual, please go back to the main menu and select
“KVM Switch“.
www.RackmountMart.com