• Place (1) Dot at center of front wall.
• Place (2) Dots at left side of front wall, (1) at 4-5 ft. above floor and (1) at 5-6 ft.
• Place (2) Dots at left side of front wall, (1) at 4-5 ft. above floor and (1) at 5-6 ft.
• Place (1) Dot on center of ceiling, halfway between speakers and listening position.
•
Place (1) Dot low and center of front wall.
•
Place (1) Dot at center of left-side wall, mid-height and halfway between speakers and
listening position.
•
Place (1) Dot at center of right-side wall, mid-height and halfway between speakers
and listening position.
Center Low
• Place (1) Dot on center of back wall, centered and 6 ft. or higher above floor.
Left Side Wall, Mid-Height
1/2 Way Between Speakers
and Listening Position
UEF
Level One
Level Two
Level Two
Level Two
UEF ACOUSTIC DOTS
PLACEMENT GUIDE
PLACEMENT: For temporary placement and testing, clean wall thoroughly with alcohol or a household degreaser. Attach a small
amount of the included “white tac” to the back (label side) of the UEF Acoustic Dot. Follow the included guide for mounting
placement. Once the final position has been decided, you can use the “white tac” as the final mounting material or for a more
permanent placement, remove the film from the back of the UEF Acoustic Dot and place on wall.
CAUTION: Placement with adhesive back overtime may become permanent and cause damage to mounting surface when removed.
CLEANING: Do not use liquid cleaners or damage may occur. We recommend using pressurized air, soft bristled paint brush or a
feather duster
