SimplySNAP BMS Gateway/ProtoAir Start-up Guide
Page 16 of 52
5.2
Connecting to the ProtoAir Over W i-Fi Access Point
When the ProtoAir is first powered up, the Wi-Fi Access Point will be enabled allowing direct connection
to the ProtoAir with Wi-Fi.
To connect to the ProtoAir Wi-Fi Access Point:
•
Click the
icon (found in the bottom-right corner of the computer screen) to open the available
Wireless Network Connections.
•
Select the desired ProtoAir and click Connect.
•
Enter the Security key. The
default is 12345678
.
The available Wireless Network Connection menu should now show that the computer is connected to
the ProtoAir.
