If you use soldering for the installation of your faucet, the seat
cartridges and washers will have to be removed before using
flame. Otherwise, warranty will be void on these parts.
Prior to beginning installation, turn off the cold and hot water lines
and open the old faucet to release built-up pressure.
When installing your new faucet, turn the connector nuts hand
tight, then use one wrench to anchor the fitting and a second
wrench to tighten the nut one additional turn. Connections that
are too tight will reduce the integrity of the system.
Wrap all threaded connections with Teflon tape available at your
local hardware or plumbing supply store. Always wrap in a clock-
wise direction.
Important Points
Protect your eyes with safety glasses when cutting or soldering
water supply line.
Cover your drain to avoid loosing parts.
Tools
Your new kitchen faucet is designed for years of trouble-free
performance.
Keep it looking new by cleaning it periodically with a soft cloth.
Avoid abrasive cleaners, steel wool and harsh chemicals as
these will dull the finish and void your warranty.
Safety Tips
Maintenance
Adjustable Wrench
Pliers
Pipe Wrench
Teflon Tape
Instructions For Models
SPP-3510 & SPP-3510-STN
What You Need To Have
Instructions For Models:
Phillips Head Screwdriver
HELP LINE
Need Help?
Symmons customer service:
(800) 796-6667, (781) 848-2250
Mon - Fri 7:30 am - 7:00 pm EST
Website:www.symmons.com
Page 1
Rev G
ZV-1083