Symmetricom TimeProvider 500, Руководство пользователя

Страница: 89 / 174

098-00172-000 Revision A – December, 2009 TimeProvider 500 2.0 User’s Guide 89
Chapter 4 CLI Commands
Set Commands
telnet = allow
icmp = allow
Example:
Blocks remote use of Telnet.
set firewall telnet block
Response:
telnet blocked
set interface
This command is new for version 2.0 to support interface connections.
This command enables or disables an interface connection. See Interface
Connections , on page 55 for more information.
Syntax:
set interface [if0|if1|if2|if3|if4] enable | disable
Default:
if0 = enabled
if1 = disabled
if2 = disabled
if3 = disabled
if4 = disabled
Example:
set interface if1 enable
Response :
Interface 1 enabled
set interface attachments
This command is new for version 2.0 to support interface connections. In version
1.0 there was only a single interface connection.
This command controls which interface connection the selected external
capability should use. The external capacities are:

GM1 = GrandMaster 1

GM2 = GrandMaster 2