Symmetricom TimeProvider 500, Руководство пользователя

Страница: 85 / 174

098-00172-000 Revision A – December, 2009 TimeProvider 500 2.0 User’s Guide 85
Chapter 4 CLI Commands
Set Commands
set auto-neg
This command sets whether or not the TimeProvider 500 will auto-negotiate
connection speed with a device directly connected to its physical Ethernet network
port (RJ45). The available connection speed is always 100Base-T, electrical, and
when the TimeProvider 500 is set to enable, the TimeProvider 500 displays the
available connection speed. The disable setting is used when a network does not
want to use the Ethernet auto-negotiation process.
Syntax:
set auto-neg { enable | disable }
Default:
Auto-neg = enable
Example:
set auto-neg disable
Response:
Auto-negotiation disabled
set bridge-time
This command sets the amount of time (in seconds) that the TimeProvider 500
remains in bridge mode.
Syntax:
set bridge-time time_val
Range:
Time_val = [ 120, 121, … , 86400]
Default:
Time_val = 420 seconds
Example:
Sets the bridging time to 300 seconds.
set bridge-time 300
Response :
Bridging time set to 300