Symmetricom TimeProvider 500, Руководство пользователя

Страница: 110 / 174

110 TimeProvider 500 2.0 User’s Guide 098-00172-000 Revision A – December, 2009
Chapter 4 CLI Commands
Set PTP Commands
Example:
Sets the desired announce interval to 4 seconds.
set ptp unicast announce-int 4
Response:
Announce period set to 4 seconds
set ptp unicast lease-int
This command sets the lease duration that the TimeProvider 500 will attempt to
establish between a grandmaster clock server and itself.
Syntax:
set ptp unicast lease-int lease_duration
Range:
lease_duration = [ 10, 11, … , 3000 ] seconds
Default :
300 seconds
Example:
Sets the lease duration to 200 seconds.
set ptp unicast lease-int 200
Response :
PTP lease set to 200 seconds
set ptp unicast sync-int
The sync-rate range has changed for version 2.0 .
This command sets the TimeProvider 500 requested unicast packet rate for Sync
and Delay_Resp messages from master clock(s).
Syntax:
set ptp unicast sync-int sync_rate
Range:
sync_rate = [ 16 | 32 | 64 ] packets/second
Default: