Symmetricom TimeProvider 500, Руководство пользователя

Страница: 108 / 174

108 TimeProvider 500 2.0 User’s Guide 098-00172-000 Revision A – December, 2009
Chapter 4 CLI Commands
Set PTP Commands
set ptp dscp
This command configures the Differentiated Services Code Point (DSCP) value for
TimeProvider 500 outbound packets. DSCP is the lower 6 bits of the DS field of the
IP packet header.
Syntax:
set ptp dscp dscp_value
Range:
dscp_value = [0, 1, …, 63 ]
Default:
dscp_value = 0
Example:
Sets the DSCP outbound packet value to 16.
set dscp to 16
Response:
DSCP set to 16
set ptp mgmt
This command is new for version 2.0.
The command controls whether the selected PTP device allows PTP management.
This provides user control on which external devices are allowed to configure and
control actions in the TimeProvider 500. See
PTP Management .
Syntax:
Set ptp mgmt { gm1 | gm2 | node-mgr } { enable | disable }
Default:
gm1 = enable
gm2 = enable
node-mgr = disable
Example:
TP-500> set ptp mgmt gm1 enable
Note : The
set configuration factory
command resets the
set ptp mgmt
value to its default value. The
set configuration
default
command will not change the current setting.