manualshive.com logo in svg

Symmetricom TimeProvider 2300, Руководство пользователя, Страница: 73 / 338

Поделиться
Скачать
Symmetricom TimeProvider 2300 Скачать руководство пользователя страница 73

098-00564-000 Revision A3 – July, 2013

TimeProvider 2300/2700 User’s Guide

73

Chapter 3  

TimeProvider 2300/2700 CLI Command Set

show clock

Displays the system date, time, and leapseconds in several formats.

– Current system date and time

– Accumulated leapseconds between TAI and UTC time

– Pending leapseconds

Command Syntax:

show clock

Example:

TP2700> show clock

Response 1:

system time:  2012-11-30 22:35:24
Leap sec: 

34

Leap pending: 0

Response 2:

After the system powered up, the date and time are entered or not entered by user, 
but the system has never been locked to GNSS, the response will be as follows:

System time     : 2013-05-09 16:11:17
Leap Seconds    : 35
Leap pending    : +0

Level :

User, Config, and Admin

set clock

Provisions the user-assigned Date, Time, and accumulated leapseconds.

Command Syntax:

To set the Date and Time:

Note:

 The user can only enter the date and time, and accumulated 

leap seconds when the system has never acquired time from PTP or 
GNSS (GPS or GLONASS) satellite.

Содержание TimeProvider 2300



















































































































































































































































































































































Отзывы:

Нет отзывов