manualshive.com logo in svg

Symmetricom TimeProvider 2300, Руководство пользователя, Страница: 70 / 338

Поделиться
Скачать
Symmetricom TimeProvider 2300 Скачать руководство пользователя страница 70

70

TimeProvider 2300/2700 User’s Guide

098-00564-000 Revision A3 – July, 2013

Chapter 3  
TimeProvider 2300/2700 CLI Command Set

alias

This command is used to assign an alias for a CLI command (or any character 
string). The alias can then be used as a convenient substitution for the CLI 
command to which it has been assigned.

The alias command can also be used to display all defined aliases and the 
commands to which they have been assigned.

Command Syntax:

To assign an alias name to a command (or any portion of a command):

alias <user-defined-alias> “<character-string>”

To display all defined aliases and the commands to which they have been 
assigned:

alias

Example 1: 

To set the alias “abc” for the command 

show ip status mgmt

. The command string 

must be contained within double quote marks (“”)

tp2700> alias abc “show ip status mgmt”

Example 1a: 

To use the alias “abc” to execute the command 

show ip status mgmt

:

tp2700> abc

Response 1a:

MGMT Link encap:Ethernet HWaddr 00:B0:AE:00:00:05
inet addr:192.168.5.14 Bcast:192.168.5.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:70867 errors:0 dropped:0 overruns:0 frame:0
TX packets:1986 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4511319 (4.3 MiB) TX bytes:162895 (159.0 KiB)
Interrupt:21 Base address:0xe000

Example 2:

To display the aliases assigned for the TP 2300/2700:

tp2700> alias

Response 2:

Содержание TimeProvider 2300



















































































































































































































































































































































Отзывы:

Нет отзывов