Symmetricom TimeProvider 2300, Руководство пользователя, Страница: 159 / 338

098-00564-000 Revision A3 – July, 2013 TimeProvider 2300/2700 User’s Guide 159
Chapter 3
TimeProvider 2300/2700 CLI Command Set
set snmp
Use this command to provision the SNMP v2 state, trap version, user assignment,
manager assignment, and trapuser and v2 community assignments.
Command Syntax:

To add an SNMP user or trapuser:
set snmp add {user | trapuser} <name> securelvl {noauth |
auth | priv}

To add an SNMP v2-community:
set snmp add v2-community <name> securelvl {read-only|
read-write}

To add an SNMP manager:
set snmp add manager <ip-address> engineid <engine-id>

To delete an SNMP user, trapuser, or v2-community:
set snmp delete {user | trapuser | v2-community} <name>

To delete an SNMP manager:
set snmp delete manager <ip-address>

To set the SNMP trap version to either v2c or v3:
set snmp trapversion {2|3}

To provision the state of SNMP v2 communities:
set snmp state-v2 {enable | disable}
Example 1:
To add SNMP user named “maynard”, with a security level of
“priv”
:
TP2700> set snmp add user maynard securelvl priv
Response 1:
Role Max Number
SNMP User 10
Trapuser 3
Manager 3
v2 Community 10