manualshive.com logo in svg

Symmetricom SDU-2000e, Техническое описание

Поделиться
Скачать
Symmetricom SDU-2000e Скачать руководство пользователя страница 28

Chapter 2 TL1 Reference
TL1 Command and Response Conventions

28

 

SSU-2000e Technical Reference

12713140-003-2  Revision E.01 – January 2007

ctag

 (Correlation Tag) field is a six-digit alpha-numeric message identifier code 

that is received with the command and returned in the response, for correlation of 
message and response within the operating system.

The IP acknowledgment response always terminates with the less-than 
character (<). The semicolon appears after the requested output response 
message is sent.

Output Response Message Conventions

The output response indicates whether the SSU-2000e complied with (COMPLD) or 
denied (DENY) the input command.

COMPLD Output Response Message Conventions

 – If the message is received 

correctly and can be processed by the SSU-2000e within two seconds, the 
complied message is sent with data that was requested in the input command 
message. The requested data is included in the response message lines and is 
always enclosed in quotation marks.

The format for a complied (COMPLD) output response message is:

<cr lf lf>

^^^sid^date^time <cr lf>

M^^ctag^COMPLD <cr lf>

[^^^"response message" <cr lf>]

[...]

;

where:

sid

 

(Source Identifier)

 

is the returned ID, and is the same as the tid in the input 

command message to which the IP acknowledgment is responding

date

 

is the current year, month, and day in the SSU-2000e in the format: 

YY-MM-DD

time

 is the current hours, minutes, and seconds timestamp information in the 

SSU-2000e in the 24-hour format: HH:MM:SS

ctag

 (Correlation Tag) field is a six-digit alpha-numeric message identifier code 

that is received with the command and returned in the response, for correlation of 
message and response within the operating system

COMPLD

 

is the complied message

"response message"

 

is the response message. The response message line for 

complied messages always begins with 3 spaces (^^^) followed by the response 
message enclosed in quotation marks, and terminated by <cr lf>. Multiple lines of 
response messages are allowed. Each command response is terminated by a 
semicolon following the last <cr lf>.

DENY Output Response Message Conventions

 – The DENY response contains 

a four-character error code (ercd) that describes the reason for the denied 
response. For example, the error code ICNV indicates 

Input Command Not Valid

. 

The error codes are listed in 

Table 2-1

.

Содержание SDU-2000e



































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды