manualshive.com logo in svg

Symmetricom SDU-2000e, Техническое описание

Поделиться
Скачать
Symmetricom SDU-2000e Скачать руководство пользователя страница 232

Chapter 3 ICS Command Reference

USERS

232

 

SSU-2000e Technical Reference

12713140-003-2  Revision E.01 – January 2007

you enter the password, you are prompted for the user level 
(1 through 4).

PWD

Changes the password of the specified user. If the user id is 
not in the system, this command exits with an error. 
Password confirmation is required. This command requires 

username

 and 

password

 as its operands.

DELETE

Deletes the specified user from system. If the user id is not 
in the system, this command exits with an error. This 
command requires 

username

 as its operand.

ACCESS

Changes the access level of a specified user. If the user id 
is not in the system, this command exits with an error. Once 
the user is entered, the user shall be prompted to change 
the access level. This command requires 

username

 and 

password

 as its operands.

TEMPPWD

Provides a temporary password to a specified user. The 
user at first login must change this temporary password. 
This command requires 

username

 and 

password

 as its 

operands.

DISABLE

Disables, enables, or unlocks the specified user in the 

ENABLE

system.

UNLOCK

Remarks TL1 requires user names and passwords to be limited to 10 characters.

Related

LOGIN

, 

BYE, SECURITY

RestrictionsNone

Содержание SDU-2000e



































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды