Symbol VRC 89 Series, Руководство по продукции, Страница: 37 / 108

4-1
Chapter 4
Operating the Terminal
Introduction
This chapter describes how to power, initialize, and operate the terminal.
Powering on the VRC 89XX
While the terminal’s processor and display are off, programs or data in the system's
memory are retained. Power-up restores the display, and processing continues from where
it was before power-down.
Note: Charge the internal battery when powering on the terminal for the
first time (refer to Installation and the Internal Battery on page 2-12).
To power on the terminal:
1. Turn on the Power Switch on the back of the terminal.
2. Press the Suspend Button on the membrane panel to power on the terminal.
To suspend the terminal’s operation, press and hold the Suspend Button until the Release
for Suspend message appears.
Figure 4-1. Suspend Button
Suspend Button