Symbol SE 2223, Руководство по интеграции

Страница: 209 / 260

9-114
SE 2223/3223 Scan Engine Integration Guide
Intercharacter Delay
Parameter # 6Eh
Select the intercharacter delay option matching host requirements. The intercharacter
delay gives the host system time to service its receiver and perform other tasks between
characters. The delay period can range from no delay to 99 msec in 1 msec increments.
After scanning the bar code below, scan two bar codes beginning on
page 9-134 to set the
desired time-out. If you make an error, or wish to change your selection, scan the
Cancel bar code on page 9-136 .
Iintercharacter Delay
Host Serial Response Time-out
Parameter # 9Bh
This parameter specifies how long the decoder waits for an ACK or NAK before resending.
Also, if the decoder wants to send, and the host has already been granted permission to
send, the decoder waits for the designated time-out before declaring an error.
The delay period can range from 0.0 to 9.9 seconds in 0.1 second increments. After
scanning the bar code below, scan two numeric bar codes beginning on
page 9-134 .
Time durations of less than 1.0 second require a leading zero. If you make an error, or
wish to change your selection, scan the
Cancel bar code on page 9-136 .
Host Serial Response Time-out