background image

Operating the Phone

Press 

SND

to power on the Data Phone

and activate a network connection. After
the initial message, the phone
displays

Idle

status. 

Connecting to the Network

The quality of Data Phone communication and data collection depends on the network radio recep-
tion. Large objects and other radiating devices can affect network reception. Use the Radio Signal
Strength Indicator on the display to monitor reception quality. The NetVision Data Phone can also
cause radio-frequency interference to other devices. Use the Data Phone only in areas designated by
the network administrator. 

If the phone cannot connect to the network, the phone displays 

No Network

. The phone cannot

make or receive calls, receive paged messages or perform data collection when disconnected from
the network.

The NetVision Data Phone ships with basic defaults for immediate use. The network administrator
preloads each Data Phone with configuration data to enable the advanced features and access other
system-related applications. The network administrator configures NetVision Data Phones in one of
two ways:

- As a shared phone, the system administrator preloads the Data Phone with a list of user profiles.

This allows you to pick up and use any Data Phone.

- As a personal phone, the system administrator preloads the Data Phone for one user. 

The Setup user profile is reserved for the network administrator. Support and Symbol user profiles are
reserved for Symbol Technologies support personnel. 

Logging on to a NetVision Data Phone

Users log onto the network to operate the NetVision Data Phone.
Obtain a user name and password (PIN) from the network
administrator. 

1. Press 

FCT

NAME

to log on to the network.  

2. Select the user name from the list. 
3. Press 

SND

to select the user name. 

4. Enter the PIN for the user name and press 

SND

to complete the

network log in.

Battery

status icon

User name

Network and
phone status

Radio Signal Strength
Indicator (RSSI)

Phone line

and APPS icon

Содержание NetVision NP-3010













Отзывы: