Symbol MK2200 MicroKiosk, Руководство по продукции

Страница: 76 / 278

3 - 26 MK2200 MicroKiosk for CE .NET 4.2 Product Reference Guide
2.
To set the month, tap the arrows on either side of the month shown, or select the month label to choose
from a list of months.
3.
To select a date, tap the date in the calendar.
4.
To set the current time, highlight the hours, minutes, seconds or AM/PM field in the
Current Time
field. Tap
the up/down scroll arrows to change the highlighted selection.
5.
To change the time zone, select it from the list labeled
Time Zone
.
6.
Tap on the check box for the system to automatically adjust the clock for daylight saving.
7.
Tap Apply to apply the new date/time settings.
Inactivity Manager
To set up the inactivity manager:
1.
Tap
Start > Settings > Control Panel
.
2.
Double-tap the
Inactivity Manager
icon.
Figure 3-7
Inactivity Manager Screen
3.
Select the application to run during inactivity by tapping the button. (The default application is
SimpleSaver.exe.)
4.
Enter the timeout (in seconds). The default is 0, which allows the system to run continuously without going
into inactivity mode.
5.
Tap OK .
6.
Tap
Start > Programs > Save Configuration
to save the new settings in the MK2200 configuration
(mkconfig.reg) file.
NOTE
The date resets to June 1, 1999, 12:00 PM upon a cold boot. Use the Control Panel or the
SNTP Client to update this (see Network Time Update: SNTP Client on page 8-10 ).
To permanently set the time zone and daylight saving settings, use the RDM or System Menu on
the MK2200.