Symbol MiniScan MS1204FZY, Руководство по интеграции

Страница: 170 / 260

10 - 64 Symbol MiniScan MSXX04 Series Integration Guide
Set Lengths for Interleaved 2 of 5
Parameter # L1 = 16h, L2 = 17h
The length of a code refers to the number of characters (i.e., human readable characters) the code contains, and
includes check digits. Lengths for I 2 of 5 can be set for any length, one or two discrete lengths, or lengths within a
specific range.
One Discrete Length - Select this option to decode only those codes containing a selected length. For example,
select I 2 of 5 One Discrete Length , then scan 1 , 4 , to decode only I 2 of 5 symbols containing 14 characters.
Numeric bar codes begin on page 10-111 . To change the selection or cancel an incorrect entry, scan the Cancel
bar code on page 10-113 .
*I 2 of 5 - One Discrete Length
Two Discrete Lengths - Select this option to decode only those codes containing two selected lengths. For
example, select I 2 of 5 Two Discrete Lengths , then scan 0 , 2 , 1 , 4 , to decode only I 2 of 5 symbols containing 2
or 14 characters. Numeric bar codes begin on page 10-111 . To change the selection or cancel an incorrect entry,
scan the Cancel bar code on page 10-113 .
I 2 of 5 - Two Discrete Lengths
Length Within Range - Select this option to decode only codes within a specified range. For example, to decode I
2 of 5 symbols containing between 4 and 12 characters, first scan I 2 of 5 Length Within Range , then scan 0 , 4 , 1
and 2 (single digit numbers must always be preceded by a leading zero). Numeric bar codes begin on page
10-111 . To change the selection or cancel an incorrect entry, scan the Cancel bar code on page 10-113 .
I 2 of 5 - Length Within Range
Any Length - Scan this option to decode I 2 of 5 symbols containing any number of characters.
I 2 of 5 - Any Length
NOTE
Selecting this option can lead to misdecodes for I 2 of 5 codes.