Symbol MC9000-K/S, Справочное руководство

Страница: 374 / 750

MC9000-K/S with Windows
®
Mobile 2003 Software for Pocket PCs PRG 8-32
Dial Automatically from an Application
After a dial-up connection is set up, the Connection Manager automatically tries to connect whenever
Pocket Internet Explorer, Pocket Inbox, or any other program that uses a dial-up connection is used.
To dial automatically:
1. Start the program that uses a dial-up connection. Enter a request for receiving and/or
transmitting information (e.g., in
Pocket Internet Explorer , enter a new URL and tap “Go”).
The mobile computer automatically tries to connect.
If the phone number or dialing location is wrong, tap Settings . Tap Manage
existing connections and edit the properties of the connection.
2. Depending on the phone and connection settings, entering a passkey and/or a password
may be required before the phone starts to dial.
3. If the dial-up password was not saved, the Network Log On screen may appear. Enter the
Password and tap ok .
4. When the mobile computer starts calling, the call status can be seen on both the mobile
computer and phone display. After the mobile computer connects, it receives/transmits the
information as requested (e.g.,
Pocket Internet Explorer displays the requested web site).
Bluetooth LAN Access
This section explains how to use dial-up networking to access a Bluetooth-enabled LAN access point
(AP) for a network connection. To use this method for LAN access, ensure the Bluetooth AP supports
communication as a Bluetooth dial-up modem. With this method of communication the Internet
Explorer can be used to connect to the server.
The steps required to create a Bluetooth-enabled LAN connection via APs are similar to creating a
new dial-up. A valid telephone number and other advanced settings for the office network or ISP are
not required.