Symbol M2004-I418, Специальные эксплуатационные инструкции

Страница: 21 / 42

M2004-I418 Special Operating Instructions
(73-39696-418)
Revision A: February 2004
21
Plural Stage ADF Rule
A new ADF criteria and action allow
formatting of plural stage data. When any
plural stage bar code is read (criteria is “When
Plural Stage Scan”), the data is sent
according to the specification (action is “Send
Plural Stage Format”), i.e., the data is sent as
follows:
<formatted 1st row>
<formatted 2nd row>
<formatted 3rd row>
<formatted 4th row>
where the row formatting is determined by the
Plural Stage Row Data Transmission Format
Options
on page 13.
This new criteria allows the user to perform
standard ADF on plural stage bar codes by
reading them as a single bar code.
To recreate the default rule:
1. Scan the “When Plural Stage Scan Da-
ta” bar code below:
When Plural Stage Scan Data
(Criteria)
2. Scan the “Send Plural Stage Format”
bar code below:
Send Plural Stage Format
(Action)
3. Scan the “Save Rule” bar code from the
Cyclone
™
M2000 Series Product Refer-
ence Guide).
This allows you to send plural stage format
after entering several ADF rules (some of
which use the When Plural Stage Scan Data