Symbol M2004-I418, Специальные эксплуатационные инструкции

Страница: 12 / 42

M2004-I418 Special Operating Instructions
(73-39696-418)
Revision A: February 2004
12
Plural Stage Same Single Symbol
Timeout
This parameter sets the time the scanner
waits after a plural stage bar code is decoded
to accept decodes of any of the single bar
codes making up this plural stage bar code.
The scanner accepts decode data if a new bar
code is seen, or if this timeout has expired.
To set this parameter (programmable from 0.0
to 5.0 seconds in .1 second increments), scan
the bar code below followed by two numeric
bar codes, starting on
page 39 .
Plural Stage Single Symbol Timeout