manualshive.com logo in svg

Symbol LT 1804, Руководство по продукции, Страница: 7 / 129

Поделиться
Скачать
Symbol LT 1804 Скачать руководство пользователя страница 7

 

About-ii

 

LT 1804 Product Reference Guide: About This Manual

 

If your problem cannot be solved over the phone, you may need to return your 
equipment for servicing. If that is necessary, you will be given specific 
directions.

 

Note:

 

Symbol Technologies is not responsible for any damages 
incurred during shipment if the approved shipping 
container is not used. Shipping the units improperly can 
possibly void the warranty. If the original shipping 
container was not kept, contact Symbol to have another 
sent to you.

 

Symbol Support Center

 

In the U.S.A, for service information, warranty information or technical assis-
tance, call:

SYMBOL SUPPORT CENTER

 

1-800-653-5350

 

If you purchased your Symbol product from a Symbol Business Partner, con-
tact that Business Partner for service.

 

Canada

 

Mississauga, Ontario
Canadian Headquarters
(905) 629-7226

 

Europe

 

Wokingham, England
European Headquarters
0734-771-222 (Inside UK)
+441-734-771222 (Outside UK)

 

Asia

 

Singapore
Symbol Technologies Asia, Inc.
337-6588 (Inside Singapore)
+65-337-6588 (Outside Singapore)

Содержание LT 1804


































































































































Отзывы:

Нет отзывов