manualshive.com logo in svg

Symbol LT 1804, Руководство по продукции

Поделиться
Скачать
Symbol LT 1804 Скачать руководство пользователя страница 11

 

1-4

 

LT 1804 Product Reference Guide: Setting Up the LT 1804

 

RS-232 Battery Operation

 

1. Insert a 9-volt battery into the battery pack.

2. Plug the 9-pin connector at the end of the scanner's cable into one end of 

the battery pack.

3. Use the adapter cable to connect the LT 1804 to the host device. Connect one 

end of this cable to the battery pack and the other to the appropriate port 
on the host device (either a stationary or portable terminal).

4. If desired, plug one end of the power supply connector into the receptacle 

on the side of the battery pack. Plug the other end of the connector into an 
AC outlet.

The LT 1804 scanner uses either an alkaline battery or a nickel-cadmium 
rechargeable battery. Low battery power is signaled by four short, high tone 
beeps, as well as scanning interruptions. If this occurs, change or recharge the 
battery as soon as possible.

 

Figure 1-2.  RS-232 Battery Operation

Battery Pack

Adapter

Cable*

Portable Data

Terminal

Power Supply
(As Required)

LT 1804

*3-foot extension cable is available.

Adapter Cable

Содержание LT 1804


































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды