Call us anytime! 800-929-8061
To program the Symbol LS4278 for communication to a USB host, follow the steps below.
1.
REPLACE BATTERY INSIDE THE SCANNER WITH THE NEW ONE
THAT’S INCLUDED IN THE BOX.
2.
Connect the USB interface cable to the cradle and to your host (PC)
3.
If using an external power supply (to allow fast charging of the scanner), insert the power cable into the power port on the back of
the cradle, and connect the power supply to an AC power outlet
4.
Let the scanner fully charge. Takes about 3 hours if using an external power supply and about 5 hours using the USB cable
5.
Scan “Set Factory Defaults” barcode below
6.
a.
Scan the barcode (S/N) located on the cradle.
b.
If the barcode is not present on the top front of cradle (like pictured above), you can scan the CMII ID on the back of
the cradle (see image below).
