8
LS3008
Programming Bar Codes
Following are some frequently used programming bar codes.
Set Defaults
Scan
SET DEFAULTS
to set all parameters to their default values.
SET DEFAULTS
Scanning Modes
Scan the appropriate bar code below to determine the scanning pattern.
•
SINGLE LINE ONLY
- No up and down scan line movement (no
raster).
•
MULTI-LINE SMART
RASTER
- The scan line begins as a single line
and moves up and down (rasters) when a partial scan of a bar code is
detected, or no bar code is decoded 500 ms after the trigger is pulled.
•
MULTI-LINE
ALWAYS RASTER
(default) - Rastering (up and down
scan line movement) begins immediately.
SINGLE LINE ONLY
MULTI-LINE SMART RASTER
MULTI-LINE ALWAYS RASTER (Default)
NOTE
For additional host types, refer to the LS3008 Product Reference
Guide, p/n 72E-86092-xx, available on the LS3008 CD, or on the
Symbol website:
