Symbol iPOS TC, Руководство по продукции

Страница: 23 / 54

2-7
Setting Up the iPOS TC System
Installing the Screen Guard
The screen guard protects the iPOS TC's screen from typical wear such as scratches and
spills. Replace the screen guard when excessive scratches are visible or if a liquid is spilled
on the screen. This maintenance extends the operation of the iPOS TC.
To install the screen guard onto the iPOS TC:
1. Disconnect power from the iPOS TC.
2. Clean the surface of the terminal and touchscreen using a cloth dampened with
non-abrasive glass cleaner. Do not spray liquid directly onto the terminal . Wait
until the terminal and glass are completely dry.
3. On the back of the screen guard, remove the paper adhesive guard.
Figure 2-5. Removing Adhesive Guard