Symbol DS 3408, Руководство по продукции

Страница: 251 / 406

Advanced Data Formatting 15 - 3
Rule 1: The Code 128 Scanning Rule
Step Bar Code On Page Beep Indication
1 Begin New Rule 15-6 High High
2 Code 128 15-9 High High
3 Send next 5 characters 15-27 High High
4 Send <CTRL M> 15-47 High High
5 Send next 5 characters 15-27 High High
6 Send <CTRL P> 15-47 High High
7 Send next 2 characters 15-26 High High
8 Send <CTRL D> 15-46 High High
9 Save Rule 15-6 High Low High Low
Rule 2: The UPC Scanning Rule
Step Bar Code On Page Beep Indication
1 Begin New Rule 15-6 High High
2 UPC/EAN 15-10 High High
3 Send all remaining data 15-26 High High
4 Send <CTRL M> 15-47 High High
5 Save Rule 15-6 High Low High Low
To correct any errors made while entering this rule, scan Quit Entering Rules on page 15-7 . If the rule is already
saved, scan Erase Previously Saved Rule on page 15-7 .
Alternate Rule Sets
ADF rules may be grouped into one of four alternate sets which can be turned on and off when needed. This is
useful to format the same message in different ways. For example, a Code 128 bar code contains the following
information:
Class (2 digits), Stock Number (8) digits, Price (5 digits)
This bar code might look like this:
245671243701500
where:
Class = 24
Stock Number = 56712437
Price = 01500
Ordinarily, data is sent as follows:
24 (class key)
56712437 (stock key)
01500 (enter key)