Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Руководство администратора

Страница: 86 / 861

86 Maintaining your security gateway
Shutting down the security gateway appliance
Prerequisites
Complete the following task before beginning this procedure:
■
“Saving and activating configuration changes” on page 59
To reboot the security gateway appliance
1 In the SGMI, on the System menu, click Reboot .
2 When prompted to confirm the reboot, click Yes .
The Symantec Gateway Security 5000 Series v3.0 logon dialog box displays and the security
gateway reboots.
3 When the reboot has completed, you can log on to the SGMI again.
Related information
For further information related to this topic, see the following:
■
“Rebooting a cluster” on page 523
Shutting down the security gateway appliance
Some security gateway maintenance procedures require you to shut the security gateway down. In
particular, if you need to install a field replaceable unit (FRU) such as a fan or hard disk, you should
shut down the security gateway.
This procedure describes shutting down the appliance from the SGMI.
You can also shut the appliance down manually, using the System menu options on the appliance’s
LCD panel. For instructions, see the section on shutting down the appliance in the
Symantec Gateway
Security 5000 Series v3.0 Installation Guide .
Prerequisites
None.
To shut down the security gateway appliance
1 In the SGMI, on the System menu, click Shutdown .
2 When prompted to confirm the shutdown, click Yes .
The SGMI closes and the Symantec Gateway Security 5000 Series v3.0 logon screen is displayed.
3
To log on to the SGMI again, manually start the appliance.
4 In the log on screen, type your password and click Logon .
Related information
For further information related to this topic, see the section on using the System menu in the Symantec
Gateway Security 5000 Series v3.0 Installation Guide .
Understanding and using licenses
The security gateway is comprised of a base firewall component that controls access through the
security gateway and additional components that provide specific kinds of protection and connectivity.
When you receive the security gateway, all components are activated by a 30-day grace period license.
The grace period license gives you full functionality for all security gateway components, and content
update for content security signatures and definitions. You can configure all components and use them
in security gateway rules, filters, and tunnels.