Symantec Security 5600 Series, Security 5400 Series,Clientless VPN 4400 Series, Руководство администратора

Страница: 101 / 861

101 Maintaining your security gateway
Backing up and restoring configurations
12
If you do not want to wait for the reboot to start, click OK .
The Symantec Gateway Security 5000 Series v3.0 logon dialog box displays and the security
gateway reboots.
13 When the reboot has completed, log on to the SGMI again.
Related information
For further information related to this topic, see the following:
■
“Backing up and restoring cluster configurations” on page 534
■
“Installing licenses” on page 94
■
“Modifying system information” on page 109
■
“Modifying a network interface” on page 108
Using command-line utilities to perform a local or remote backup
If you do not have access to the SGMI, you can use command-line backup utilities to back up your
security gateway configuration. You can later use the SGMI to restore the backed up configurations
just as you restore configurations that are backed up using the SGMI.
There are two ways to perform a command line back:
■
From your local computer
■
From a remote computer
For both methods, you can specify a backup file name or let the backup utility generate the backup file
using a default file name. The default file name combines the security gateway host name and time
stamp in the following format:
<hostname>. yyyymmddhhmmss.bak
Where:
g
For example: mygateway.20050408110614.bak is the default name of a backup file on host mygateway,
performed on April 8, 2005 at 11:06:14.
You use command line utilities for both of the following procedures:
■
Performing a local command line backup
■
Performing a remote command line backup
hostname is the name of the security gateway appliance
yyyy is the year
mm is the month
dd is the day
hh is the hour
mm is the minute
ss is the second