Symantec NetBackup 5220, Руководство по устранению неисправностей оборудования

Страница: 46 / 169

46
Non-Hot-swappable components (FRUs)
The following components are field-replaceable units (FRUs). For the safety of
personnel, equipment and data you must perform a full OS-driven shutdown of the
equipment before working inside the chassis of the NetBackup 5220. Unplug all power
sources and peripherals before removing the device from the rack. Review all applicable
safety guidelines. The device must be properly removed from the rack and placed on a
solid electrostatic-preventive surface before opening the chassis.
Non-hot-swappable components
Device Component Component location
NetBackup 5220 SATA internal disk drives #1 & #2 Drive tray accessed from chassis
NetBackup 5220 Control panel Front right panel
NetBackup 5220 Chassis cover Top
NetBackup 5220 PCI Riser Assembly Rear mid panel
NetBackup 5220 RAID card Rear mid panel
NetBackup 5220 4-port GE NIC Rear mid panel
NetBackup 5220 2-port 10GE NIC Rear mid panel
NetBackup 5220 2-port 8Gb FC HBA Rear mid panel
NetBackup 5220 Air duct Inside chassis, mid-left
NetBackup 5220 Fan baffle Inside chassis, mid-front
NetBackup 5220 Air baffle Inside chassis, front- left
NetBackup 5220 Bridge board Inside chassis, mid
NetBackup 5220 Fan module Inside chassis, mid-front
NetBackup 5220 Power distribution module Inside chassis, mid-left
NetBackup 5220 Mainboard RAID card (qty 2) Drive tray, backplanc
NetBackup 5220 Mainboard RAID battery Inside chassis, front- left
NetBackup 5220 DIMMs (qty 12) Inside chassis, rear-left
NetBackup 5220 I/O module #1 Inside chassis, rear
NetBackup 5220 I/O module #2 Inside chassis, rear