Sym GTS 250, Руководство по обслуживанию

Страница: 35 / 217

2. Maintenance Information
2-14
Battery
Open the inner box lid.
Loosen screw & remove the battery cover
Battery cable remove
：
1.
Disconnect the cable negative terminal (-),
2.
then the cable positive terminal (+)
3.
Remove the battery from the motorcycle.
。
If there is some rust on battery posts, clean it with
steel brush
Install the battery in the reverse procedures of
removal
Caution
y If there is rust on the posts very serious,
spray some hot water on the posts. Then,
clean it with steel brush so that can remove
rust for more easily.
y Apply some grease on the posts after rust
removed to prevent from rust again.
Nuts, Bolts Tightness
Perform periodical maintenance in accord with the
Periodical Maintenance Schedule.
Check if all bolts and nuts on the frame are
tightened securely.
Check all fixing pins, snap rings, hose (pipe)
clamps, and wire holders for security.
To this chapter contents