2. Maintenance Information
2-4
Gear Oil
Inspection
Check gear oil if leaking.
Park the motorcycle with main stand on flat level
place.
Turn off engine and remove the gear oil draining
plug.
Place a measurement cup under the draining
hole.
Check gear oil if enough.
Replacement
At first, remove the gear oil refilling bolt, and then
remove the draining plug.
Install the draining plug after drained oil out.
Torque value: 0.8~1.2 kgf-m
Caution
Fill out specified gear oil from the engine oil filling
opening.
Install the oil filling bolt.
Torque value: 1.0~1.4 kgf-m
Quantity: 100 c.c.
Recommended: King-Mate HYPOID GEAR OIL
(#140)
Fuel System
Fuel Lines
Remove luggage box, rear carrier, body covers.
Check all lines, and replace it when they are
deterioration, damage or leaking.
Warning
Fuel filter
Remove luggage box, rear carrier, body covers.
Remove fuel pump and fuel unit assembly.
Check if the fuel filter is clogged, broken. If so,
clean or replace the fuel filter with new one.
Caution
Gasoline is a low ignition material so any kind
of fire is strictly prohibited as dealing it.
Inspect if washer is in good condition.
Replace it with new one if it was deformed or
damaged.
The arrow on the fuel pump and fuel sender
mean the assembly direction of fuel tank,
check if it is in corrective installation.
Gear oil draining plug
Fuel filter
Gear oil
refilling bolt
Fuel pipes
