Retro Wireless Speaker
Included In the Box
1. Speaker 1pc
2. Micro- USB Charging Cable 1pc
3. 3.5 mm Audio Cable 1pc
4. User Manual 1pc
5. Warranty Card 1pc
Specifications
Device Operation
Attach the small connector of the supplied micro-USB charging
cable to the micro-USB charging port on the back of the speaker.
Attach the other connector to the USB port on your computer, a
USB charging device, or a
5V USB Adapter
(not included)
and
plug into a wall socket.
The charging LED indicator will turn
RED
while charging and turn
off when the speaker is fully charged.
Note: - Before moving or installing this product, make sure the
Power switch of the unit is in OFF position.
- Disconnect the USB cable from the speaker when unused
for long periods of time.
Note: - Playback is controlled through your connected device,
volume adjustment can be controlled with the volume knob.
- After the unit has paired and connected, it will re-connect
automatically when the unit is powered on and the device
is in range.
Note: - When powering on, it will automatically go to FM Radio
mode.
- Control the volume through the volume knob.
For service assistance and product information,
please call: 1-800-968-9853.
Curtis International Ltd.
7045 BECKETT DRIVE, UNIT 15, MISSISSAUGA, ON, L5S 2A3
www.curtisint.com
Charging the Speaker
Turn the speaker ON by moving the
[POWER]
switch to the ON
position.
Turn the speaker OFF by moving the
[POWER]
switch to the OFF
position.
Powering ON/OFF
Attach one connector of the supplied 3.5mm audio cable to the Aux
in port the back of the speaker, Attach the other connector to the
headphone jack on your media-playing device.
When plugged in, the speaker will automatically switch to AUX
mode, and the LED indicator will turn solid RED. Playback is
controlled through your connected device. Volume adjustment
can still be controlled with the volume knob on the front of the
speaker.
Aux-In Mode
For best reception, extend the FM radio antenna. You may need
to adjust or position the antenna for certain stations.
· When in FM radio mode, the LED indicator will flash RED.
· Use the FM tuner dial on the front of the speaker to select a radio
station.
Using the FM Radio
1. Turn the speaker ON by moving the
[POWER]
switch to the
ON position. A tone will be heard and the speaker will turn on
in FM radio mode. Press the
[MODE]
button to switch modes.
When the speaker is in Bluetooth pairing mode, the LED
indicator will quickly flash
GREEN
.
2. Set your mobile device to search for Bluetooth devices. When
it appears, select
Sylvania
SP563
from the list of found devices.
3. Once successfully paired, a tone will be heard and the LED
indicator will slowly flash
GREEN
.
Bluetooth Mode
LED Status
Green Solid
Green flash quickly
Red flash slowly
bluetooth waiting for pairing
Powering on
FM radio mode
Aux-In mode / charging
Green flash slowly
Red solid
Bluetooth paired
TROUBLE SHOOTING GUIDE
No power
- Make sure the power switch is set in the
“ON” position.
- Speaker needs to be charged
- Check whether the volume is set at
minimum level.
No sound
Unit doesn’t connect to device
- Speaker needs to be connected/re-paired
to device
SP563-BLACK/BLUE/PINK
Device Overview
Front Panel
Back Panel
Thank you for purchasing this product. Please read this manual
carefully, and save it for future reference.
FM Tuner Dial
1. Power ON/OFF Switch
2. LED Indicator
3. AUX in Port
4. Micro USB Charging Port
5. Mode Button (Change mode: Bluetooth, FM Radio, Aux-In)
6. FM Radio Antenna
Speaker
Volume Knob
1
2
3
4
5
6
SYLVANIA is a registered trademark of OSRAM Sylvania Inc. used under license.
Speaker Driver: 3
"
Bluetooth Version : 4.1
Bluetooth Range: 33ft (10m)
FM: 87.5 ~108.0MHZ
Battery: 1200mah rechargeable lithium battery
Charging: DC 5V --- 1 A
