Aluna SP/LED
IS
13108
B
IS500
Concord
ISO
9001
Quality
Management
ISO
14001
Environmental
Management
EM 539002 FM 01687
Feilo Sylvania Europe LTD
Avis Way, Newhaven East Sussex BN9 0ED UK
www.feilosylvania.com
© Concord Lighting Limited 02.18
68
IP
underwater model for very low voltage - 12V DC
glass features: plane float glass - safety tempered
Installation:
• feeding must be done through a safety power (SELV) providing 12V
DC stabilized secondary tension. The floodlight is supplied by us with
the LED pre-installed and connected with 5.5 meters cable section
2x1mm
2
according CENELEC HD 22.16.S1 (for AD8 water submersion).
The cable and the fixture must not be tampered with for any reason.
• max. installation depth 10m.
Relamping and maintenance:
• The relamping must be done with maximum attention avoiding to dirty the
sealing gasket and its contact surface. It is therefore necessary before opening
the fixture to carefully wipe the floodlight then unscrew the round frame by the
proper key (code 4068469) - If the gasket is damaged, deformed or not in perfect
conditions it is necessary to change it with the one enclosed in the packing. (see
figure)
• it is essential to do a frequent cleaning of the glass and of the outer surface
of the fixture to avoid build up of mud and dirtiness resulting in dangerous
overheating due to obscured light and heat dissipation. Clean the glass screen
carefully by removing limestone deposits by means of a scraper.
119
60
75
¯106
¯140
200
90
It is necessary to place the gasket exactly
into its seat as shown in the picture. Then
screw on gently the frame and tighten it
by the key 4068469.
max
10m
MI/1710-C
- 3
a
ed
