27
EN
PLAYBACK
S
Noise reduction (DVD-only)
Reduces the noise of the playback picture.
3
Press [RETURN
] to exit.
You can enjoy stereophonic virtual space through your
existing 2 channel stereo system.
1
During playback, press [MODE].
2
Use [
K
/
L
] to select your desired setting.
3
Press [RETURN
] to exit.
Some BD-video have the PIP function which enables you
to display the secondary video in the primary video. You
can call up the secondary video by pressing
[PIP]
whenever the scene contains the secondary video.
1
During playback, press [PIP].
PIP information will appear.
2
Use [
K
/
L
] to select the secondary video you
want.
• The secondary video will be displayed and the
secondary audio will be output.
3
Press [RETURN
] or [PIP] to remove the PIP
information.
Some BD-video and DVD-video contain scenes which have
been shot simultaneously from various angles. You can
change the camera angle when
appears on the TV
screen.
1
During playback, press [ANGLE].
• The selected angle will be displayed on the display
bar at the top of the TV screen.
2
Use [
K
/
L
] to select your desired angle.
“Off”
: Shows the original picture as recorded.
“1”
: Executes 3D noise reduction which detects and
deletes the noise by comparing each picture
frames.
“2”
: Executes MPEG noise reduction which reduces
the block noise and mosquito noise on the
subtitle on movie.
“3”
: Executes both MPEG noise reduction and 3D
noise reduction.
Note
• The setting will remain the same even if the unit is
turned to the standby mode.
• For the picture output from HDMI OUT jack, “Black
Level” is not effective.
• You cannot adjust the setting during rapid playback.
Virtual Surround
“Off”
: No surround effect
“1”
: Natural surround effect
“2”
: Stronger surround effect
Note
• Set the virtual surround setting to “Off” or lower the
volume if the sound is distorted.
• Virtual surround does not function during rapid
playback.
• For the virtual surround, audio signal will always be
2-channel LPCM.
Off
PIP (BONUSVIEW) Setting
Note
• The secondary audio will not be output when the
secondary audio is set to “Off” or when “BD Audio
Mode” is set to “HD Audio Output”. Refer to
“Switching Audio Soundtrack” on page 29 and
“Setting the BD Audio Mode” on page 30.
• Secondary video can also be called up by pressing
[MODE]
.
Camera Angle
Note
• If “Angle Icon” setting is “Off” in “Others” menu,
will not appear. Refer to page 42.
primary
video
secondary
video
1 / 3
I
NT
R
O
D
U
CT
IO
N
C
ON
NE
CTIONS
PLAY
BAC
K
F
UNC
T
IO
N
S
ETU
P
O
TH
E
R
S
E5K40UD_EN.book Page 27 Wednesday, December 24, 2008 11:15 AM
