Quick Installation Guide
Sykik Rider CR1
Thank you for choosing Sykik. For more information and complete user manual,
please visit www.SYKIK.com
Quick Test
1. Connect cameras 1 & 2 to DVR host .
2. Find the special USB power cable (8" USB to 6 pin round) and connect the DVR to your power
bank or USB adaptor for a quick test before installation.
3. Prepare installation if unit powers up, and cameras show up on the display..
Quick Installation Guide
1. Locating the proper place to fix the front & rear camera, wired controller (optional), GPS
tracker(optional) and DVR unit (Recommended to be placed under the seat).
2. Plan the path of camera cables and power cable before installation.
(wired controller cable, GPS tracker cable if desired)
3. Fix and connect the parts by method of your choice (3M tape, screws, cable ties) on the proper
place.
4. Standard power module: It is recommended the standard power cable to be connected to
ignition, or any point after, such as fuse box, radio, lights.... so the system starts up and shuts
down with your bike. However, you can connect to your battery, but you need to make sure to
turn the unit off manually after rides to avoid draining the battery.
